
EXI-PLAST
is a Custom and Proprietary producer of a wide range of
Moulded Polymer Products. Household, recreational,
agricultural, pet products and industrial components as
well as large containers for liquid, dry goods
and Recycling products.
Blow Moulders
B-1 - BLOW MOULDER
D-W CUSTOM
Capacity up to 35 gal. product sizes
Type - Continuous drop parison - programmed. Head
tooling sizes from 3" through 10" diameter. 40 ton
press with 26" x 30" clear platen.
Min shut
height 5” + 24” travel. |
B-2 - BLOW MOULDER
IMPCO B-30 R250
Capacity up to 10 gal. Plus product sizes.
Reciprocating screw 3.2Kg/7.5Lbs heads w/13.50 in.
Cen.
Head tooling sizes from 2"
through 8" diameter.
33 ton press with 37" x 24" H. clear platen
Min shut height 12" + 24" travel. |
B-3 - BLOW MOULDER
D-W CUSTOM
Capacity up to 3 gal. product sizes
Type - Accumulator, 1.2 Kg (2.5 lb.) single head
Head tooling from 1" through 6.5" diameter.
20 ton press with 22" x 20" clear platen
Min shut height 6" + 12" travel. |
B-4 - BLOW MOULDER
HARTIG-B-140
Capacity up to 100 gal. plus product sizes.
Kautex accumulator 15 kg./20 Lt.
(33 lb.) single head
Product sizes 48" D through to 96"
Head Tooling from 4" through to 14" diameter.
140 Ton press with 60" X 96" clear platen.
Min shut height 24.25" + 48" travel. |
B-5 - BLOW MOULDER
CINCINNATI E-90
Capacity up to 70 gal product sizes.
Cincinnati accumulator 6.8 kg.
(15 lb.) single head
Head Tooling from 4" through to 9.50" diameter.
50 Ton Press with 48" X 37" clear platen
Min shut height 17.25" + 20" travel. |
B6 - BLOW MOULDER KRUPP-KAUTEX
KB-250
Capacity 180 Gal. plus part sizes
Kautex accumulator FIFO 23Kg./30
lt Single head.
Head tooling from 6” through to 18” diameter.
175 Ton press with 60” W X 72” H Clear platen
Min shut height 32" + 40" travel. |
EXI-PLAST
is a "Full Service Provider" Product Concept,
R & D,
Design, Engineering & Prototyping, Tooling,
Production,
Blow Moulding, Injection Moulding, Finishing and
Packaging. We look forward to your
inquiries, to assist in any ongoing production
requirements you may have at present, or to quote on
moulds for future moulded products, you may be
considering.